Machsupport Forum

Mach Discussion => Mach Screens => Topic started by: Valen on May 08, 2010, 02:41:44 PM

Title: Mach 3 in small Netbooks (1024 x 600)
Post by: Valen on May 08, 2010, 02:41:44 PM

Hi,
I am trying to use Mach 3 in a small Toshiba NB 100 Netbook (10' screen). 
(I have the smoothstepper hardware in order to use the USB port, because this computer has not a parallel port, of course...)

The problem is that its max screen resolution is 1024X600 pixels, and the standard Mach 3 screen needs 768 pixels of height..... and for that, some buttons are always out of the screen, and there is not any slice bar to move the Mach 3 screen up and down...! (I think it is a big bug or forgotten functionality in this software....!!!!!!)

Somebody have screens for only 600 pixels of height?

Thanks

Valentin

 :-\ :-\ :-\

Title: Re: Mach 3 in small Netbooks (1024 x 600)
Post by: zealous on May 15, 2010, 03:55:37 PM

Selecting the "auto screen enlarge" in the "gen config" should fit the screen to your resolution.

Title: Re: Mach 3 in small Netbooks (1024 x 600)
Post by: Valen on May 15, 2010, 05:18:45 PM

Thanks....! It worked perfectly....!
 ;) ;) ;) ;)