Machsupport Forum
Mach Discussion => VB and the development of wizards => Topic started by: Alasen on April 30, 2010, 04:41:26 AM
-
Dear all,
I am new at this forum, and the reason I am writing is that I am trying to develope my own CNC machine (Plasma) and, after downloading mach 3 demo version, I have some questions about its way of working and the most interesting hardware components to install.
1) I have been reading some mach 3 programmer manual and I really don't know if programmed macros and functions can be runing at the same time that Code G is being executed. This is... can I configure some functions to work parallely to code G (like a PLC)? How can get this? Do i have to install a PLC or mach 3 is enough for this (loading some libraries)?.
2) This question is about hardware. I am trying to work with four axis motored by AC servos and I have seen a lot of links with breakout board suppliers, so I don't know which option to take, I would appreciate your help in order to recommend the more optimal breakout board for the project.
3) Also, any recommendation for AC servo suppliers?
Thanks for your time, once I have all this information I will be ready to start the project.
Best regards,
Agustin.