Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: iaindunn on April 17, 2010, 10:59:50 AM

Title: No mCodes in MDI mode?
Post by: iaindunn on April 17, 2010, 10:59:50 AM

Hi All
Ive been using mach 2.63 for a while and updated to latest version last night. For some reason I cant seem to type in M3 and M5 in MDI mode as i used to. The spindle is working and I can start it using the F5 key. is this a new safety feature or am I missing something in the setup?

thanks in advance

Iain

Title: Re: No mCodes in MDI mode?
Post by: iaindunn on April 18, 2010, 04:45:18 AM

Hi All
I found out the problem and that was the M key on the keyboard was set to MDI select. Hope this helps anyone else who runs into this :)

Title: Re: No mCodes in MDI mode?
Post by: Hood on April 18, 2010, 05:48:29 PM

Thanks for coming back with the solution, been a few people with similar issues and thats one of the reasons I dislike using HotKeys.

Hood

Title: Re: No mCodes in MDI mode?
Post by: iaindunn on April 19, 2010, 06:27:42 AM

Yeh a little bizzare to assign a hotkey as default that you are going to use a lot elswhere.
Still a great program otherwise

Iain

Title: Re: No mCodes in MDI mode?
Post by: Hood on April 19, 2010, 06:37:05 AM

its not a default hotkey as far as I know, what screenset are you using?

Hood

Title: Re: No mCodes in MDI mode?
Post by: iaindunn on April 19, 2010, 08:25:09 AM

Oh.. I was using the default screen set

Title: Re: No mCodes in MDI mode?
Post by: Hood on April 19, 2010, 08:43:58 AM

Just checked and its not possible to assign a hotkey for the MDI in the screenset, didnt think it was but wasnt 100% sure, so only way is to assign in the xml or Mach code itself and I have never seen it assigned in Mach code so it would seem to be a user set thing in your xml.
Hood

Title: Re: No mCodes in MDI mode?
Post by: iaindunn on April 19, 2010, 12:00:45 PM

How bizzarre..i did copy the XML file from my old version of Mach 3 (2.63) . This may be the cause as the motor tuning etc was all wrong and it didnt copy across properly

Title: Re: No mCodes in MDI mode?
Post by: Hood on April 19, 2010, 02:37:01 PM

There have been a couple of random weird things with the xml and the last few versions so it is possible that it changed on yours, especially as you say going from such an old version to the latest in one leap.
Hood

Title: Re: No mCodes in MDI mode?
Post by: iaindunn on April 19, 2010, 03:46:24 PM

Thanks Hood.