Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: enytned1 on October 02, 2006, 02:16:58 PM

Title: G68 rotation
Post by: enytned1 on October 02, 2006, 02:16:58 PM

Will Mach3 automatically turn off G68 rotation when a program ends(M30) or do I have to have a G69 in the safety code line at the beginning of my program?

Title: Re: G68 rotation
Post by: Brian Barker on October 02, 2006, 11:19:47 PM

You should put a G69

Thanks
Brian