Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Cncman2nv on February 12, 2010, 11:17:38 AM

Title: Program start from a tool number
Post by: Cncman2nv on February 12, 2010, 11:17:38 AM

Is there a way to start running a gcode program by specifying a tool number example "tool breakage"
because when i scroll down thru the gcode window and select "run from here" button in mach it ask for a prep move that is even relevant to the part

Title: Re: Program start from a tool number
Post by: Hood on February 12, 2010, 01:47:57 PM

Sorry dont follow what you are asking, can you try and explain a bit more please.
Hood

Title: Re: Program start from a tool number
Post by: bowber on February 13, 2010, 05:51:46 AM

I think Adam is asking if you can "run from here" without the prep move.

Steve