Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Bill_O on February 08, 2010, 02:10:44 PM
-
Has anyone used a pc with an
AMD GEODE 500 MHZ
or
Intell CELERON 600 MHZ CPU
I found some nice little fanless enclosed pcs from IBase and wanted to try them out.
I have a lot of graphics on screen and occasionally use a plc run serially and a camera run ethernet.
All responses welcome.
Bill
-
Think they will be struggling if you are using the parallel port but if using an external device such as the SS they may be fine. Graphics etc will be dependant on the card they have.
Hood