Machsupport Forum

Mach Discussion => FAQs => Topic started by: CharliePatten on February 01, 2010, 09:17:43 AM

Title: PLC question
Post by: CharliePatten on February 01, 2010, 09:17:43 AM

Has anyone run a PLC in conjunction with Mach 3 and if so how is it done?

Title: Re: PLC question
Post by: poppabear on February 01, 2010, 04:20:05 PM

Yes,

see "Member docs" and the Brians guide, it shows using a PLC for both serial and tcp.

scott