Machsupport Forum

Third party software and hardware support forums. => PoKeys => Topic started by: M250cnc on January 30, 2010, 12:34:19 PM

Title: Speed/Feed Fluctuation
Post by: M250cnc on January 30, 2010, 12:34:19 PM

There is a slight fluctuation in the speed/feed control.

Is there a capacitor i can fix to the pot to cure the problem ?

If so what would be the value ?

Thanks
Phil

Title: Re: Speed/Feed Fluctuation
Post by: borisz on January 30, 2010, 01:28:40 PM

Try with 100nF.

regards

Boris