Machsupport Forum

*****VIDEOS***** => *****VIDEOS***** => Topic started by: Monty on January 23, 2010, 08:34:14 PM

Title: EmcoTurn140 test cut
Post by: Monty on January 23, 2010, 08:34:14 PM

Here is a video of the EmcoTurn140 making the first test cut.

http://www.youtube.com/watch?v=pYYkp1wkSBY

Sorry about the unstable camera. I had to switch hands to make sure the Estop was covered.

It still have a momentary panic whenever the turret takes off for the spindle. I'll get some better quality video after I have a good program worked out with the tool changer in action.

Monty

Title: Re: EmcoTurn140 test cut
Post by: RICH on January 23, 2010, 09:30:29 PM

Looking good, the machine is stable and that what's counts.
RICH

Title: Re: EmcoTurn140 test cut
Post by: ostie01 on January 23, 2010, 10:44:56 PM

I would love to have one like this.

Very good looking, thanks to share.


Jeff

Title: Re: EmcoTurn140 test cut
Post by: Monty on January 27, 2010, 07:19:32 PM

More testing.

http://www.youtube.com/watch?v=7AQGT7AnlD4&feature=player_embedded

Monty