Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: rwerden on January 21, 2010, 11:12:42 PM

Title: Looking to convert vector file in a PDF to gcode
Post by: rwerden on January 21, 2010, 11:12:42 PM

What program can do this?

Title: Re: Looking to convert vector file in a PDF to gcode
Post by: RICH on January 21, 2010, 11:51:02 PM

rwerden,
Aide PDF to DXF Converter. It worked quite well as i used it at work a lot.

RICH