Machsupport Forum

Mach Discussion => Non English Forums => Spanish => Topic started by: merolivol on January 11, 2010, 01:02:17 PM

Title: Elipse con lazy cam
Post by: merolivol on January 11, 2010, 01:02:17 PM

Tengo un problema, estoy trazando elipses con auto cad y al pasar el dxf  a lazy cam las reconoce como un poligono, se puede modificar esta situacion?

Title: Re: Elipse con lazy cam
Post by: ger21 on January 11, 2010, 01:38:07 PM

Use v12 dxf.

Title: Re: Elipse con lazy cam
Post by: merolivol on January 11, 2010, 08:07:05 PM

Gracias Gerry
Otra pregunta, que ventajas tiene la version profesional de Lazy Cam , en la demo tengo que descontar los diametros de los cortadores para que me salga la plantilla a medida, sigue igual gracias.

Title: Re: Elipse con lazy cam
Post by: ger21 on January 11, 2010, 10:52:27 PM

Sorry, no habla espaniol

Title: Re: Elipse con lazy cam
Post by: merolivol on January 12, 2010, 09:42:27 AM

Ok Gerry no problem.

Title: Re: Elipse con lazy cam
Post by: LESV on January 19, 2010, 08:31:42 PM

Gerry, what is "v12 dxf"   ???

Title: Re: Elipse con lazy cam
Post by: ger21 on January 19, 2010, 10:04:48 PM

Version 12 format .dxf files.

Title: Re: Elipse con lazy cam
Post by: RICH on January 20, 2010, 09:12:27 AM

In the Lazyturn Manual, Appendix "C' (  located in Members Docs) you will find info on DXF. The info is not all inclusive but should be infomative.
RICH