Machsupport Forum

Mach Discussion => Mach Screens => Machscreen Screen Designer => Topic started by: dunkers on November 29, 2009, 07:34:54 AM

Title: Tickers
Post by: dunkers on November 29, 2009, 07:34:54 AM

Not sure if this is a machscreen problem or something else...

If I copy the standard 1024.set and then save it as something else, the tickers no longer work. For instance, on the main screen there is ticker0 next to the reset button which, on startup, displays "Press Reset .... Emergency Mode..." etc. In the saved screenset it just shows 'ticker0' all the time.

However, the 'Error', 'profile' and 'File' labels correctly show messages.

Title: Re: Tickers
Post by: Klaus1311 on November 30, 2009, 02:32:38 PM

Hi dunkers

this is a MachScreen problem, I will fix it.



Klaus

Title: Re: Tickers
Post by: Klaus1311 on November 30, 2009, 04:00:17 PM

Hi dunker,

the ticker issue is fixed in version V1.33.c. You can download it from my website.



Klaus

Title: Re: Tickers
Post by: dunkers on November 30, 2009, 05:10:16 PM

Thank you very much :)