Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: ArmandoM on November 24, 2009, 12:58:42 PM

Title: For development
Post by: ArmandoM on November 24, 2009, 12:58:42 PM

It is in relation to the G52, the file TestBoard-10B.nc is a great example I have an object
want to design four pieces on the machine.
In Mach3Mill it shows four objects, very good but has a problem.
In the course of the cutter he does the four objects is only the first object.
In programming VS2003 has subroutine that made the copies of object, you
can make a subroutine to path on top of other objects.
See http://www.cambam.co.uk/forum/index.php?topic=841.0
Note I have VS2005, I do not want the source code for Mach3.
Regards

Armando

Title: Re: For development
Post by: ArmandoM on November 29, 2009, 07:32:07 AM

Hi all

My goal is path on top of other objects, in Mach3Mill.
Attached file TestBoard-10B_CV.nc already configured the block.
Any person can simulate the CutViewer Mill, and help me?

Thanks

Title: Re: For development
Post by: Graham Waterworth on November 29, 2009, 03:44:23 PM

This is what I get from your code in Mach3 and also what AlphaCAM makes of it :-

Title: Re: For development
Post by: ArmandoM on November 29, 2009, 07:12:09 PM

Hi Graham

The problem is to simulate in Mach3.
Run the Mach3 and see trajectory.