Machsupport Forum

Mach Discussion => FAQs => Topic started by: Soundman on November 22, 2009, 01:29:46 AM

Title: Looking for some one to make me some small gears:
Post by: Soundman on November 22, 2009, 01:29:46 AM

The subject about said it all. I use electric turkey knifes in my business to cut foam. These knifes have a wormgear and a drive gear the drive gear is made out of Nylon and doesn't last very long I have a lot of samples with one side striped if anyonewould like to play with this project please let me know and I will get a hold of you off line Thanks

Ken

Title: Re: Looking for some one to make me some small gears:
Post by: Harley2003 on December 31, 2009, 06:50:28 PM

Hi Ken,

I could likely make a small mold for you and make these gears in the 1000's .... if you are interested in doing something like this let me know.

I am a mold maker by trade and have all the CAD/CAM/CNC experience necessary to reverse engineer the parts, design and build the required tooling to make you these parts.

My name is Brian... Let me know.