Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: pedroesteves.biosurfit on November 20, 2009, 01:31:52 PM
-
Good Afteernon,i have a problem im my Minitech 3.
I´m working without the two limit switch in the x and Y axis.
But i´m working everyday with the machine,without any problem,but today i made a very simple program,and the machine skips the main program and just do the Subprogram.
I put others program(that were Good,because i tried in others days),and they also went wrong.The machine did the same,he skip the main program and just do the subprogram.
Can anybody tell me what i´m doing wrong?