Machsupport Forum

Mach Discussion => Mach Screens => Finished Screens => Topic started by: gabi68 on October 10, 2009, 09:50:08 AM

Title: Lathe screen (if you have one)
Post by: gabi68 on October 10, 2009, 09:50:08 AM
Hi to all,

Anyone has a lathe screen with this:
- X, Z axis;
- metric;
- tool changer (turret) - Emco style (like Brians lathe);

RGDS
Gabi
Title: Re: Lathe screen (if you have one)
Post by: gabi68 on October 10, 2009, 09:34:57 PM
 :( nobody....
Title: Re: Lathe screen (if you have one)
Post by: Ron Ginger on October 17, 2009, 10:35:28 PM
I have one I did for my emco lathe. It does the tool changer. Its not really finished but maybe it will be of interest.

I did it for a small touch screen so its only 640x800. It uses many of the screen buttons from the standard lathe screens
Title: Re: Lathe screen (if you have one)
Post by: micro-thai on August 24, 2013, 01:57:22 AM
thank you  ;D
Title: Re: Lathe screen (if you have one)
Post by: BosniaCNC on September 12, 2014, 07:14:35 PM
http://www.machsupport.com/forum/index.php/topic,24422.0.html