Machsupport Forum

Third party software and hardware support forums. => Modbus => Topic started by: mark stevenson on September 17, 2009, 07:01:36 AM

Title: SIMATIC S7-200 Micro PLC
Post by: mark stevenson on September 17, 2009, 07:01:36 AM

i have a SIMATIC S7-200 Micro PLC and have try to get it to work with mach3
with no look
i got the modbus Library and upload to the plc
can any one help me  :-\

Title: Re: SIMATIC S7-200 Micro PLC
Post by: poppabear on September 17, 2009, 10:39:53 AM

Ask Ed Gilbert on the Mach Yahoo group, or Dave of Dave Controls, both use Siemans PLCs.

scott