Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: electraflyit on August 21, 2009, 08:42:10 AM

Title: Accidently locked the config setting.
Post by: electraflyit on August 21, 2009, 08:42:10 AM

 I was just going through all the menus ... the lock and unlock as well... now I can't unlock to change things.
Eddie

Title: Re: Accidently locked the config setting.
Post by: vmax549 on August 24, 2009, 10:03:22 PM

 The password is "None" or "Mach1Pass"

Title: Re: Accidently locked the config setting.
Post by: electraflyit on August 24, 2009, 11:28:14 PM

Thanks for that