Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: giordano on June 24, 2009, 06:39:01 PM

Title: What are the OEM Code of LEDs used in "Port 1 Pins current State"?
Post by: giordano on June 24, 2009, 06:39:01 PM

Hello to all. Want to know the correspondence between the number of pins of LPT1 with the OEM Code (Led) 139 to 160. Thanks in advance. Giordano

Title: Re: What are the OEM Code of LEDs used in "Port 1 Pins current State"?
Post by: Hood on June 24, 2009, 06:43:18 PM

137 - 160

Hood

Title: Re: What are the OEM Code of LEDs used in "Port 1 Pins current State"?
Post by: giordano on June 24, 2009, 06:51:13 PM

Hello Hood. Thanks for your reply. Let me explain better. For example, the LED pin 15 of LPT1 is OEM Code 140. Thank you.

Title: Re: What are the OEM Code of LEDs used in "Port 1 Pins current State"?
Post by: Hood on June 24, 2009, 06:54:50 PM

Sorry, late here and wasnt reading properly.
 Well afraid I do not have a clue, never worked out what they represent, then again I have never really tried to ;D
Hood

Title: Re: What are the OEM Code of LEDs used in "Port 1 Pins current State"?
Post by: Chip on June 24, 2009, 09:45:01 PM

Hi, Giordano

The only one's defined/that work are are Input pin's 10, 11, 12, 13 & 15, As far as I know.

Chip

Title: Re: What are the OEM Code of LEDs used in "Port 1 Pins current State"?
Post by: giordano on June 25, 2009, 06:33:45 AM

Hello, Chip. Making a new screenset Italian and wanted to monitor the activities of LPT1. Thank you. Giordano

Title: Re: What are the OEM Code of LEDs used in "Port 1 Pins current State"?
Post by: Chip on June 25, 2009, 03:22:28 PM

Hi, Giordano

I did one like this, It would be nice if they were all working.

Chip

Title: Re: What are the OEM Code of LEDs used in "Port 1 Pins current State"?
Post by: giordano on June 26, 2009, 08:14:34 AM

Hello, Chip. Very well done. Do you have a particular version or you have modified the original screen for Mach3? In my version, the 3,042,020 pins are not numbered and inputs 10,11,12,13 and 15 are arranged differently. You could tell me what the Code of OEM led each pin from n. 1 to n. 25 or, better yet, send me a copy of your screen? Regards. Giordano

Title: Re: What are the OEM Code of LEDs used in "Port 1 Pins current State"?
Post by: Chip on June 27, 2009, 08:29:20 PM

Hi, Giordano

It's the standard 1024 screen set, I used a copy of it and "Screen4" to move the led's around and added items I wanted.

Hears 2 work-in  progress Screen set's I'm working to help "Mostly" new Users figure out what "Mode" Mach is in, 1 for Mill, 1 for Lathe, Both have a pop-out lathe Pendent at this point, You need to install the bitmaps in C:\Mach3\Bitmaps\Millbitmaps folder.

Have Fun, Chip

Title: Re: What are the OEM Code of LEDs used in "Port 1 Pins current State"?
Post by: giordano on June 28, 2009, 02:10:39 PM

Hello, Chip. I you were a great help. Thank you very much. Regards, Giordano.