Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: eloid on June 02, 2009, 12:45:21 PM

Title: newbie, learning gcode for beginers?
Post by: eloid on June 02, 2009, 12:45:21 PM

hello, im just about finished my cnc machine and would like to learn gcode
is there and easy way to look up terms and codes to understand what they do
and a good book or website to help out newbies?

Title: Re: newbie, learning gcode for beginers?
Post by: RICH on June 02, 2009, 09:10:25 PM

eloid,
1.Check out your local community college and see if they offer a course.
2.If you open Mach mill they have a description of all the g and m codes.
3.Use the wizards to do simple things and then follow the code line by line as it's highlighted in the display window.
   Then try and write some code yourself and see how it goes.
4.You can scan the internet and may find some basic tutorials which will help you.
5.CNC Programing Techniques by Peter Smid ( covers a lot and you'll need discipline to stay at it ).
6.There is a program in mach called Teach, never used it, but you may want to have a look.
Have Fun,
RICH

Title: Re: newbie, learning gcode for beginers?
Post by: vmax549 on June 02, 2009, 10:12:37 PM

Easy CNC - A Beginners Guide to CNC

Title: Re: newbie, learning gcode for beginers?
Post by: Graham Waterworth on June 05, 2009, 07:47:51 AM

Or you could try this site:-

http://www.cncci.com/resources/tips.htm

Graham

Title: Re: newbie, learning gcode for beginers?
Post by: RICH on June 05, 2009, 09:45:31 AM

Graham,
Good reference site with a lot of information.
Thanks

eloid,
Maybe start by looking at this one first. 
http://www.cncci.com/resources/articles/CNC%20basics.htm

RICH