Machsupport Forum

Mach Discussion => Mach Screens => Screen designer tips and tutorials => Topic started by: podunk on May 26, 2009, 05:31:55 PM

Title: Single Line GCode window
Post by: podunk on May 26, 2009, 05:31:55 PM

Hi all,

I did a search and came up empty so hopefully this has not been previously answered.

I am creating a screen and would like to have only the currently executed (normally highlighted white) GCode line displayed.
When I try to scale the GCode window the text gets tiny.

Is it possible

Thanks

Title: Re: Single Line GCode window
Post by: MachineMaster on May 26, 2009, 06:31:31 PM

In Screen4 (The screen building program) double click the G code screen. At the bottom of the pop up is a box where you set number of lines of code. Then you can size the box for the size text you want.

Title: Re: Single Line GCode window
Post by: podunk on May 26, 2009, 07:14:15 PM

That was easier than I thought.  Thanks for your response.