Machsupport Forum

Mach Discussion => Mach Screens => Topic started by: Cartierusm on May 21, 2009, 06:58:34 PM

Title: Screen4 Huge Problem Solved
Post by: Cartierusm on May 21, 2009, 06:58:34 PM

I have been trying to design a screen for years now and I never could complete one because object (buttons, graphics or anythine else) would jump around the screeen changing position for no reason. I tried everything changin video settings and other stuff. Turns out the screen has to be able to be viewed in it's entirety. What I mean was my monitor was set to 1024x768 and so was the mach screen, since the Screen4's program borders would make not all of the layout of mach viewable without using scroll bars it would get confused about actual pixel screen position. Needless to say all I did was increase my monitor resolution so the entire thing could be see and low and behold no more problem. I finally got a screen exactly the way I want it. Hope this helps someone else.

Title: Re: Screen4 Huge Problem Solved
Post by: Karlsmith on February 02, 2010, 10:05:47 PM

I really wonder what is useful here .. I am not able find any useful thing ..

Title: Re: Screen4 Huge Problem Solved
Post by: Cartierusm on February 02, 2010, 11:08:05 PM

This is your first post and this is what you have to say? Pretty lame.

I'm not going to explain it as I have a feeling you're a troll.

Title: Re: Screen4 Huge Problem Solved
Post by: RICH on February 03, 2010, 12:38:23 AM

Karlsmith,
The post has to do with screen modifications associated with Mach and not Web Site deisgn.
Are you strolling along the wrong path?
RICH

Title: Re: Screen4 Huge Problem Solved
Post by: Sam on February 03, 2010, 12:46:16 AM

Thanks for taking the time to post, Cart. All helping hands are appreciated.

Title: Re: Screen4 Huge Problem Solved
Post by: Mattw on February 12, 2010, 11:18:30 PM

That's good to know, Cart.  Thanks.