Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: dhookings on May 18, 2009, 07:06:27 PM

Title: Can cycles
Post by: dhookings on May 18, 2009, 07:06:27 PM

When I opt for circles below a certain radius to be can cycles, there is a drop down list to select G81, G82... etc.
I select G83 and LCam produces gcode with a G81.
Is this a feature or should I look for a solution? At the moment I edit the resulting G code.

Dave

Title: Re: Can cycles
Post by: Chip on May 18, 2009, 09:28:49 PM

Hi, Dave

I would think it hasn't been implemented fully.

Chip

Title: Re: Can cycles
Post by: dhookings on May 19, 2009, 05:33:21 PM

Thanks Chip,

Saves me time looking for something that may not be there.
Not really a problem, editing the G Code is simple.

Regards

Dave