Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Chip on May 14, 2009, 05:22:43 PM

Title: Probing with Ver. 2.00.046 Plugin Issues
Post by: Chip on May 14, 2009, 05:22:43 PM

Hi, All

Just fired up my Probe for a little testing.

With Mach3 ver .027 get this error Pic 1

With Mach3 ver .043 get this error Pic 2, It try's to run but fail's to complete the probing without a fight, It generates code, But it appears to not complete the final Z up and return to start point.

Any Idea's, I've tried it on 2 computers hear.

Thanks, Chip

Title: Re: Probing with Ver. 2.00.046 Plugin Issues
Post by: Chip on May 14, 2009, 08:05:38 PM

Hi, All

In the Pic below, Mach3 ver .043 the probing looks like this, .5 by .5 by .250 spacing.

Chip