Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: fourxfour2 on May 11, 2009, 05:22:18 AM

Title: Help with torch up down
Post by: fourxfour2 on May 11, 2009, 05:22:18 AM

okay I have a problem...going through the brains on the torch up and down comand the Z axis is very jumpy.
also have up and down Leds on screen set with THC enable button & led and none seem to do anything...have not tried it with g code just on test bed...Maybe Scott AKA poppabear can help with this???? if he has time...
If I use the shuttle All axis are smooth and liner....it is only when the brain turns on the torch up or down...
Thanks for any help
Dave

Title: Re: Help with torch up down
Post by: tripleblack on May 12, 2009, 10:00:58 PM

hi, on the mach plasma main screen , under the thc on button, there is a setting to control how fast mach moves the z axis. i have mine set to 5.