Machsupport Forum

Mach Discussion => Mach Screens => Topic started by: budman68 on April 10, 2009, 12:04:52 PM

Title: Missing Toolpath?
Post by: budman68 on April 10, 2009, 12:04:52 PM

Hi guys,

I'm making up my own lathe screen and basically what I've done is just saved my custom mill screen to an lset file because I'm used to where everything is.

Now everything seems to be working but the toolpath does not show up on 2 of my screens like it does for my mill screen set. It shows up on the MDI and the Diagnostics page, but not my Toolpath and Program Run pages. Seems very odd.... lol.

Is this a quirk with lathe screens or am I missing something?

Thanks for your time-  :)
Dave

Title: Re: Missing Toolpath?
Post by: budman68 on April 10, 2009, 12:34:51 PM

Nevermind, I just hamfisted my way through it and had to delete the background and put it back up again and all is fine now-

Dave