Machsupport Forum

Mach Discussion => VB and the development of wizards => Topic started by: poppabear on March 31, 2009, 04:52:27 PM

Title: UPDATE to Mach Specific VB routines and VB Params!!
Post by: poppabear on March 31, 2009, 04:52:27 PM

Here is the link to the Member Docs on the support site.

http://www.machsupport.com/forum/index.php/board,78.0.html

The Thread called: UPDATE to Mach Specific VB routines
has the "Undocumented" VB as an extension to the Wiki docs.

The Thread called: VB "Parameters list....."
has the List of VB controlled parameters (some undocs there too).

scott

Title: Re: UPDATE to Mach Specific VB routines and VB Params!!
Post by: poppabear on April 01, 2009, 10:35:51 AM

GOOD NEWS!!!!  Art filled in my blanks/Unknowns so now BOTH the Parameters and Mach Specific VB is now Complete!!

So RE-Download the docs or copy it out of the Member Doc Windows

Scott

Title: Re: UPDATE to Mach Specific VB routines and VB Params!!
Post by: vmax549 on April 02, 2009, 05:17:59 PM

HIYA SCOTT,  GOOD job on the Parameters(;-) I add it to  the manuals here.


Could you pry out of ART the full ranges of the

Led            x------*********
OemLed     X-------*********
UserLed     x--------*********

Dro            x--------*********
OemDro      x--------*********
UserDro       x---------*********

Button        x---------*********
OemButton  x------*********
UserButton  x-------*********

Maybe an updated and sorted list of all the known ones. I do have the published list in Spreadsheet format and I have it in catogories then filter 4 layers. It is simple to use that way.

Glad to donate it IF you need it. May need to update the info (;-)

ALSO a pfull published list of all the SYSTEM VARs would be nice. I know they go from 0=null to 10,320

0-499
500-600 persistant
601-1999
2000-2003 G31 data
2004-5160
5161-5166 g28 values
5181-5186 g30 values
5211-5216 g92 values

ETC,ETC

Be glad to sit down and do a spreadsheet for these IF it would be of help.  I know there are many other hiding in there(;-) It might Jog ART 's memory.

MIght be a good idea to do a program to search mach files and register all know used Vars,param,led,dros,etc used in current MACH code.




Just a thought, (;-) TP

Title: Re: UPDATE to Mach Specific VB routines and VB Params!!
Post by: poppabear on April 03, 2009, 10:07:30 AM

Brett, had asked me and a few others to contribute to a "Skeleton" function listing "Parameter type system. Brian has already mentioned this here, and on the Yahoo forum.  So at this point, I will not be doing any more to the "Old" system, since it appears they will be incorporating a new format.

Please feel free to add, or improve on the stuff I put out in any way you think would be helpful.

scott