Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: Gocmen23 on March 07, 2009, 04:49:11 PM

Title: Help Please!
Post by: Gocmen23 on March 07, 2009, 04:49:11 PM

biz mach3 ile çalışan CNC Router Makinası yaptık. Bu makinada TYPE3 ile deneme yapmak istiyoruz tanıdığımız arkadaşlarda lisanslı TYPE3 Mevcut.lakin Çıktıyı makinaya aktarmak için Post processor lazım TYPE3deki Post kütüphanesinde Mach2 veya mach3 e uyan bi uygulama varmı mesajlarınızı bekler şimdiden teşekkür ederim...

Title: Re: Help Please!
Post by: Gocmen23 on March 08, 2009, 11:46:18 AM

müdür kimse yokmu?

Title: Re: Help Please!
Post by: Graham Waterworth on March 08, 2009, 02:37:04 PM

Sorry, we do not understand your needs.

Graham

Title: Re: Help Please!
Post by: Gocmen23 on March 08, 2009, 05:00:21 PM

CNC router Machina made.we work with mach3,we want to experiment with this machine TYPE3 ,Post processor for transferring an output of the machine in the libray need TYPE3s
post mach2 or pratice match mach3 e thank you in advance do you wait for message

Title: Re: Help Please!
Post by: Graham Waterworth on March 08, 2009, 05:29:41 PM

You can use a Fanuc 6 or 11 post processor with Mach3.

Graham

Title: Re: Help Please!
Post by: Gocmen23 on March 09, 2009, 12:16:43 PM

Thank you Graham

Title: Re: Help Please!
Post by: Gocmen23 on March 09, 2009, 02:59:51 PM

thank you ver very much