Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: glengeniii on January 08, 2009, 12:41:32 AM

Title: Feedrate compensation during circular interpolations.
Post by: glengeniii on January 08, 2009, 12:41:32 AM

Does Mach3 compensate the feed rate during circular interpolations for different diameter tools, or is the feed rate calculated using the center of the tool?

Title: Re: Feedrate compensation during circular interpolations.
Post by: Graham Waterworth on January 08, 2009, 05:18:27 PM

Mach3 feeds at the rate set by the last F command. This is active until changed by another F command.

Graham