Machsupport Forum

Mach Discussion => VB and the development of wizards => Topic started by: Simso on January 02, 2009, 11:53:27 PM

Title: Lathe wizard question
Post by: Simso on January 02, 2009, 11:53:27 PM

Hi folks, Ive been using the inbuilt lathe turn wizard version 5.4, for unusual shaped end bits. My question is does anyone know how if there is enother wirad for more compound style shapes like  say a chess piece

Thanks

Title: Re: Lathe wizard question
Post by: poppabear on January 03, 2009, 10:12:24 AM

Yes, the "Lazy Turn" that Art is doing and has released beta.

scott