Files You should have

SW_Probe.SLDPRT (Solidworks Model)
SW_Probe_ForViewer.eprt
Hub.IGS
SW_Probe_Cap.IGS
SW_Probe_Body.IGS
SW_Probe_Arbour.IGS
SW_Probe_ProbeTip.IGS
SW_Probe_Platern.IGS
SW_Probe_CircBoard.IGS


The body I made form Aluminium, the hub from Engineering Nylon, the pins are 3mm silver steel, the Balls are 5mm, the probe tip I made from a Carbide Burr, Spring is fairly light weight, Screws are 2mm, or No2, or 8BA which is probably the size I used, others parts from the scrap bin, the only part you have to be careful with is pressing the pins into the hub these must be square and @ 120 degrees. 

Hope this helps, 


Shaun 

Shaun.wainford@ntlworld.com


Get Solidworks Viewer here

http://www.solidworks.com/Pages/products/solutions/viewer.html
