'( M1111.M1S Macro )
'( Needs to be installed in C:\Mach3\Macros\Mach3Mill Folder)
'( Basic Default Location or as needed )
'( Change it as your need )

Code "G17" '            Set X,Y Plane
Code "G20" '            Set INCH Units Mode
Code "G40" '            Cancle Cutter Radius Comp.  
Code "G49" '            Cancle Tool Length Offset
Code "G50" '            Re-Set All Scale Factors To 1.0
Code "G61" '            Set Exact Stop Mode
Code "G69" '            Cancel G68 Rotate Coordinate System 
Code "G80" '            Cancle Canned Cycle Mode 
Code "G90" '            Set ABS Mode
Code "G91.1" '          Set IJ's INC Mode
Code "G94" '            Set Feed Per Minute Mode

Code "G52 x0 y0 z0" '   Re-Set Temp Offset Mode

Code "F10" '            Set Default F Speed To 10

Code "M30" '            Program End and Rewind G-Code