ToolCarousel 1 0 1 Tool Carousel 0 #C0C0C0 #C0C0C0 0 12 btnReadTT 0 165 864 55 120 1 0 1 0 0 Read From \nTool Table 1;12;-16;0;0;0;700;0;0;0;1;0;0;2;32;Arial 0 0 0 local inst = mc.mcGetInstance() for pocketNum = 1, 10 do -- Iterate through pocket numbers 1-10 local toolFound = 0 -- Store tool number for this pocket for toolNum = 1, 250 do -- Iterate through possible tool numbers (adjust if needed) local pocket = mc.mcToolGetData(inst, mc.MTOOL_MILL_POCKET, toolNum) -- Get Pocket # for tool if pocket == pocketNum then toolFound = toolNum break -- Stop searching once a tool is found for this pocket end end -- Define register name local regName = string.format("iRegs0/TC/ToolSlots/Slot%d", pocketNum) local regNameDesc = string.format("iRegs0/TC/ToolSlots/Slot%dDesc", pocketNum) local regNameNotes = string.format("iRegs0/TC/ToolSlots/Slot%dNotes", pocketNum) local regNameOffset = string.format("iRegs0/TC/ToolSlots/Slot%dOffset", pocketNum) -- Create and store the tool number in the register local hRegTnum = mc.mcRegGetHandle(inst, regName) mc.mcRegSetValue(hRegTnum, toolFound) -- Save description and notes if (toolFound > 0 )then local hRegDesc = mc.mcRegGetHandle(inst, regNameDesc) local iToolDesc = mc.mcToolGetDesc(inst, toolFound) mc.mcRegSetValueString(hRegDesc, iToolDesc) local hRegNotes = mc.mcRegGetHandle(inst, regNameNotes) local iToolNotes = mc.mcToolGetDataExStr(inst, toolFound, "Notes") mc.mcRegSetValueString(hRegNotes, iToolNotes) local hRegOffset = mc.mcRegGetHandle(inst, regNameOffset) local iOffset = mc.mcToolGetData(inst, mc.MTOOL_MILL_HEIGHT, toolFound) if (iOffset == 999.999) then iOffset = "ToBeMeas" else iOffset = (string.format("%.4f",iOffset)) end mc.mcRegSetValueString(hRegOffset, iOffset) -- Output message for debugging mc.mcCntlSetLastError(inst, string.format("Stored Tool #%d (%s, %s) in %s", toolFound, iToolDesc, iToolNotes, regName)) else mc.mcCntlSetLastError(inst, string.format("No tool found for Slot #%d. Stored 0 in %s", pocketNum, regName)) end end 0 btnWriteTT 0 249 864 55 120 1 0 1 0 0 Write Slots \nTo Tool Table 1;12;-16;0;0;0;700;0;0;0;1;0;0;2;32;Arial 0 0 0 local inst = mc.mcGetInstance() -- Function to update tool assignments based on register values local function UpdateToolPockets() -- Step 1: Search for tools currently assigned to pockets 1-10 and clear them for pocketNum = 1, 10 do for toolNum = 1, 250 do -- Adjust tool count if needed local currentPocket = mc.mcToolGetData(inst, mc.MTOOL_MILL_POCKET, toolNum) if currentPocket == pocketNum then mc.mcToolSetData(inst, mc.MTOOL_MILL_POCKET, toolNum, 0) -- Remove pocket assignment mc.mcCntlSetLastError(inst, string.format("Cleared Tool #%d from Slot #%d", toolNum, pocketNum)) break end end end -- Step 2: Assign new tools to pockets based on register values for pocketNum = 1, 10 do -- Retrieve tool number from register local regName = string.format("iRegs0/TC/ToolSlots/Slot%d", pocketNum) local hReg = mc.mcRegGetHandle(inst, regName) local newToolNum = mc.mcRegGetValue(hReg) -- Validate tool number before assigning if newToolNum and newToolNum > -1 then mc.mcToolSetData(inst, mc.MTOOL_MILL_POCKET, newToolNum, pocketNum) mc.mcCntlSetLastError(inst, string.format("Assigned Tool #%d to Slot #%d", newToolNum, pocketNum)) else mc.mcCntlSetLastError(inst, string.format("No valid tool found in register for Slot #%d", pocketNum)) end end mc.mcCntlSetLastError(inst, "Tool Slot Assignments Updated Successfully") end -- Run the function UpdateToolPockets() 0 btnWriteTTDesc 0 333 864 55 120 1 0 1 0 0 Save Notes\nTo Tool Table 1;12;-16;0;0;0;700;0;0;0;1;0;0;2;32;Arial 0 0 0 local inst = mc.mcGetInstance() -- Function to update tool assignments based on register values local function UpdateToolNotes() -- -- Step 1: Search for tools currently assigned to pockets 1-10 and clear them -- for pocketNum = 1, 10 do -- for toolNum = 1, 250 do -- Adjust tool count if needed -- local currentPocket = mc.mcToolGetData(inst, mc.MTOOL_MILL_POCKET, toolNum) -- if currentPocket == pocketNum then -- mc.mcToolSetDataExStr(inst, toolNum, "Notes", 0) -- Remove pocket assignment -- mc.mcCntlSetLastError(inst, string.format("Cleared Tool #%d from Slot #%d", toolNum, pocketNum)) -- break -- end -- end -- end -- Step 2: Assign new tools to pockets based on register values for pocketNum = 1, 10 do -- Retrieve tool number from register local regName = string.format("iRegs0/TC/ToolSlots/Slot%d", pocketNum) local hReg = mc.mcRegGetHandle(inst, regName) local iToolNum = mc.mcRegGetValue(hReg) local regNameNotes = string.format("iRegs0/TC/ToolSlots/Slot%dNotes", pocketNum) local hReg2 = mc.mcRegGetHandle(inst, regNameNotes) local iToolNotes = mc.mcRegGetValueString(hReg2) -- Validate tool number before assigning if iToolNum and iToolNum > -1 then if iToolNotes then mc.mcToolSetDataExStr(inst, iToolNum, "Notes", iToolNotes) mc.mcCntlSetLastError(inst, string.format("Notes added to Tool #%d", iToolNum)) else mc.mcCntlSetLastError(inst, string.format("No notes to add to Tool #%d", iToolNum)) end else mc.mcCntlSetLastError(inst, string.format("No valid tool found in register for Slot #%d", pocketNum)) end end mc.mcCntlSetLastError(inst, "All Tool Notes Updated Successfully") end -- Run the function UpdateToolNotes() 0 grpTools 0 10 10 553 848 1 0 1 0 0 0 0 TRTool1 0 51 55 40 55 1 0 1 0 0 0 0 3 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #00FF00 #000000 10 iRegs0/TC/ToolSlots/Slot1 TRTool2 0 102 55 40 55 1 0 1 0 0 0 0 3 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #00FF00 #000000 9 iRegs0/TC/ToolSlots/Slot2 TRTool3 0 153 55 40 55 1 0 1 0 0 0 0 3 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #00FF00 #000000 8 iRegs0/TC/ToolSlots/Slot3 TRTool4 0 203 55 40 55 1 0 1 0 0 0 0 3 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #00FF00 #000000 7 iRegs0/TC/ToolSlots/Slot4 TRTool5 0 253 55 40 55 1 0 1 0 0 0 0 3 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #00FF00 #000000 6 iRegs0/TC/ToolSlots/Slot5 TRTool6 0 303 55 40 55 1 0 1 0 0 0 0 3 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #00FF00 #000000 5 iRegs0/TC/ToolSlots/Slot6 TRTool7 0 353 55 40 55 1 0 1 0 0 0 0 3 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #00FF00 #000000 4 iRegs0/TC/ToolSlots/Slot7 TRTool8 0 403 55 40 55 1 0 1 0 0 0 0 3 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #00FF00 #000000 3 iRegs0/TC/ToolSlots/Slot8 TRTool9 0 453 55 40 55 1 0 1 0 0 0 0 3 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #00FF00 #000000 2 iRegs0/TC/ToolSlots/Slot9 TRTool10 0 503 55 40 55 1 0 1 0 0 0 0 3 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #00FF00 #000000 1 iRegs0/TC/ToolSlots/Slot10 TRDesc1 0 51 123 40 280 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 sadf iRegs0/TC/ToolSlots/Slot1Desc TRDesc2 0 102 123 40 280 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 fdeas iRegs0/TC/ToolSlots/Slot2Desc TRDesc3 0 153 123 40 280 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 efsaz iRegs0/TC/ToolSlots/Slot3Desc TRDesc4 0 203 123 40 280 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 vsvz iRegs0/TC/ToolSlots/Slot4Desc TRDesc5 0 253 123 40 280 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 fewsate iRegs0/TC/ToolSlots/Slot5Desc TRDesc6 0 303 123 40 280 1 0 1 0 0 0 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 aewr iRegs0/TC/ToolSlots/Slot6Desc TRDesc7 0 353 123 40 280 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 fsefesa iRegs0/TC/ToolSlots/Slot7Desc TRDesc8 0 403 123 40 280 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 yea 3 iRegs0/TC/ToolSlots/Slot8Desc TRDesc9 0 453 123 40 280 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 More 2 iRegs0/TC/ToolSlots/Slot9Desc TRDesc10 0 503 123 40 280 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;700;0;0;0;1;0;0;2;32;Arial Narrow #000000 #C0C0C0 Some stuff1 iRegs0/TC/ToolSlots/Slot10Desc TRTool1(Lbl) 0 49 12 45 40 1 0 1 0 0 4 -1 0 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #000000 #C0C0C0 1 TRTool2(Lbl) 0 100 12 45 40 1 0 1 0 0 4 -1 0 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #000000 #C0C0C0 2 TRTool3(Lbl) 0 150 12 45 40 1 0 1 0 0 4 -1 0 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #000000 #C0C0C0 3 TRTool4(Lbl) 0 200 12 45 40 1 0 1 0 0 4 -1 0 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #000000 #C0C0C0 4 TRTool5(Lbl) 0 250 12 45 40 1 0 1 0 0 4 -1 0 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #000000 #C0C0C0 5 TRTool6(Lbl) 0 300 12 45 40 1 0 1 0 0 4 -1 0 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #000000 #C0C0C0 6 TRTool7(Lbl) 0 350 12 45 40 1 0 1 0 0 4 -1 0 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #000000 #C0C0C0 7 TRTool8(Lbl) 0 400 12 45 40 1 0 1 0 0 4 -1 0 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #000000 #C0C0C0 8 TRTool9(Lbl) 0 450 12 45 40 1 0 1 0 0 4 -1 0 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #000000 #C0C0C0 9 TRTool10(Lbl) 0 500 6 45 47 1 0 1 0 0 4 -1 0 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial #000000 #C0C0C0 10 lbl(421) 0 20 10 25 50 1 0 1 0 0 -1 0 Slot 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial Narrow -1 0 0 lbl(289) 0 20 52 25 70 1 0 1 0 0 -1 0 Tool # 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial Narrow -1 0 0 lbl(290) 0 20 215 30 150 1 0 1 0 0 -1 0 Description 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial Narrow -1 0 0 lbl(286) 0 20 498 30 70 1 0 1 0 0 -1 0 Notes 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial Narrow -1 0 0 lblOffset 0 20 710 30 60 1 0 1 0 0 -1 0 Offset 1;16;-21;0;0;0;700;0;0;0;0;3;2;1;34;Arial Narrow -1 0 0 TRNotes1 0 51 405 40 250 1 0 1 0 0 0 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 tool 10? iRegs0/TC/ToolSlots/Slot1Notes TRNotes2 0 102 405 40 250 1 0 1 0 0 0 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 iRegs0/TC/ToolSlots/Slot2Notes TRNotes3 0 153 405 40 250 1 0 1 0 0 0 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 iRegs0/TC/ToolSlots/Slot3Notes TRNotes4 0 203 405 40 250 1 0 1 0 0 0 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 iRegs0/TC/ToolSlots/Slot4Notes TRNotes5 0 253 405 40 250 1 0 1 0 0 0 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 lkjk iRegs0/TC/ToolSlots/Slot5Notes TRNotes6 0 303 405 40 250 1 0 1 0 0 0 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 bowsers iRegs0/TC/ToolSlots/Slot6Notes TRNotes7 0 353 405 40 250 1 0 1 0 0 0 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 iRegs0/TC/ToolSlots/Slot7Notes TRNotes8 0 403 405 40 250 1 0 1 0 0 0 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 iRegs0/TC/ToolSlots/Slot8Notes TRNotes9 0 453 405 40 250 1 0 1 0 0 0 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 iRegs0/TC/ToolSlots/Slot9Notes TRNotes10 0 503 405 40 250 1 0 1 0 0 0 -1 3 1;12;-16;0;0;0;900;0;0;0;0;3;2;1;34;Arial Narrow #000000 #C0C0C0 25.6789 iRegs0/TC/ToolSlots/Slot10Notes TROffset1 0 51 655 40 124 1 0 1 0 0 4 0 3 1;12;-16;0;0;0;400;0;0;0;0;3;2;1;34;Arial Narrow #FFFF00 #000000 ToBeMeas iRegs0/TC/ToolSlots/Slot1Offset TROffset2 0 102 655 40 124 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;400;0;0;0;0;3;2;1;34;Arial Narrow #FFFF00 #000000 0.0000 iRegs0/TC/ToolSlots/Slot2Offset TROffset3 0 153 655 40 124 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;400;0;0;0;0;3;2;1;34;Arial Narrow #FFFF00 #000000 ToBeMeas iRegs0/TC/ToolSlots/Slot3Offset TROffset4 0 203 655 40 124 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;400;0;0;0;0;3;2;1;34;Arial Narrow #FFFF00 #000000 0.0000 iRegs0/TC/ToolSlots/Slot4Offset TROffset5 0 253 655 40 124 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;400;0;0;0;0;3;2;1;34;Arial Narrow #FFFF00 #000000 0.0000 iRegs0/TC/ToolSlots/Slot5Offset TROffset6 0 303 655 40 124 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;400;0;0;0;0;3;2;1;34;Arial Narrow #FFFF00 #000000 0.0000 iRegs0/TC/ToolSlots/Slot6Offset TROffset7 0 353 655 40 124 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;400;0;0;0;0;3;2;1;34;Arial Narrow #FFFF00 #000000 0.0000 iRegs0/TC/ToolSlots/Slot7Offset TROffset8 0 403 655 40 124 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;400;0;0;0;0;3;2;1;34;Arial Narrow #FFFF00 #000000 0.0000 iRegs0/TC/ToolSlots/Slot8Offset TROffset9 0 453 655 40 124 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;400;0;0;0;0;3;2;1;34;Arial Narrow #FFFF00 #000000 0.0000 iRegs0/TC/ToolSlots/Slot9Offset TROffset10 0 503 655 40 124 1 0 1 0 0 4 -1 3 1;12;-16;0;0;0;400;0;0;0;0;3;2;1;34;Arial Narrow #FFFF00 #000000 66.0000 iRegs0/TC/ToolSlots/Slot10Offset Rstbtn1 0 51 778 40 55 1 0 1 0 0 CLR 1;18;-24;0;0;0;700;1;0;0;1;0;0;2;32;Arial Narrow 0 0 0 --This script takes the offset value for the tool in slot 1 and makes it 999.999 (which will be caught by the M6 as needing to remeasure) local inst = mc.mcGetInstance() local iSlotNumber = 1 -- Figure out which tool is in the slot local regName = string.format("iRegs0/TC/ToolSlots/Slot%d", iSlotNumber) local hReg = mc.mcRegGetHandle(inst, regName) local iToolNum = mc.mcRegGetValue(hReg) --Go set the value of the offset to trigger a remeasure mc.mcToolSetData(inst, mc.MTOOL_MILL_HEIGHT, iToolNum, 999.999) mc.mcCntlSetLastError(inst, string.format("Tool #%d in Slot %d will be remeasured", iToolNum, iSlotNumber)) 0 Rstbtn2 0 102 778 40 55 1 0 1 0 0 CLR 1;18;-24;0;0;0;700;1;0;0;1;0;0;2;32;Arial Narrow 0 0 0 --This script takes the offset value for the tool in slot 1 and makes it 999.999 (which will be caught by the M6 as needing to remeasure) local inst = mc.mcGetInstance() local iSlotNumber = 2 -- Figure out which tool is in the slot local regName = string.format("iRegs0/TC/ToolSlots/Slot%d", iSlotNumber) local hReg = mc.mcRegGetHandle(inst, regName) local iToolNum = mc.mcRegGetValue(hReg) --Go set the value of the offset to trigger a remeasure mc.mcToolSetData(inst, mc.MTOOL_MILL_HEIGHT, iToolNum, 999.999) mc.mcCntlSetLastError(inst, string.format("Tool #%d in Slot %d will be remeasured", iToolNum, iSlotNumber)) 0 Rstbtn3 0 153 778 40 55 1 0 1 0 0 CLR 1;18;-24;0;0;0;700;1;0;0;1;0;0;2;32;Arial Narrow 0 0 0 --This script takes the offset value for the tool in slot 1 and makes it 999.999 (which will be caught by the M6 as needing to remeasure) local inst = mc.mcGetInstance() local iSlotNumber = 3 -- Figure out which tool is in the slot local regName = string.format("iRegs0/TC/ToolSlots/Slot%d", iSlotNumber) local hReg = mc.mcRegGetHandle(inst, regName) local iToolNum = mc.mcRegGetValue(hReg) --Go set the value of the offset to trigger a remeasure mc.mcToolSetData(inst, mc.MTOOL_MILL_HEIGHT, iToolNum, 999.999) mc.mcCntlSetLastError(inst, string.format("Tool #%d in Slot %d will be remeasured", iToolNum, iSlotNumber)) 0 Rstbtn4 0 203 778 40 55 1 0 1 0 0 CLR 1;18;-24;0;0;0;700;1;0;0;1;0;0;2;32;Arial Narrow 0 0 0 --This script takes the offset value for the tool in slot 1 and makes it 999.999 (which will be caught by the M6 as needing to remeasure) local inst = mc.mcGetInstance() local iSlotNumber = 4 -- Figure out which tool is in the slot local regName = string.format("iRegs0/TC/ToolSlots/Slot%d", iSlotNumber) local hReg = mc.mcRegGetHandle(inst, regName) local iToolNum = mc.mcRegGetValue(hReg) --Go set the value of the offset to trigger a remeasure mc.mcToolSetData(inst, mc.MTOOL_MILL_HEIGHT, iToolNum, 999.999) mc.mcCntlSetLastError(inst, string.format("Tool #%d in Slot %d will be remeasured", iToolNum, iSlotNumber)) 0 Rstbtn5 0 253 778 40 55 1 0 1 0 0 CLR 1;18;-24;0;0;0;700;1;0;0;1;0;0;2;32;Arial Narrow 0 0 0 --This script takes the offset value for the tool in slot 1 and makes it 999.999 (which will be caught by the M6 as needing to remeasure) local inst = mc.mcGetInstance() local iSlotNumber = 5 -- Figure out which tool is in the slot local regName = string.format("iRegs0/TC/ToolSlots/Slot%d", iSlotNumber) local hReg = mc.mcRegGetHandle(inst, regName) local iToolNum = mc.mcRegGetValue(hReg) --Go set the value of the offset to trigger a remeasure mc.mcToolSetData(inst, mc.MTOOL_MILL_HEIGHT, iToolNum, 999.999) mc.mcCntlSetLastError(inst, string.format("Tool #%d in Slot %d will be remeasured", iToolNum, iSlotNumber)) 0 Rstbtn6 0 303 778 40 55 1 0 1 0 0 CLR 1;18;-24;0;0;0;700;1;0;0;1;0;0;2;32;Arial Narrow 0 0 0 --This script takes the offset value for the tool in slot 1 and makes it 999.999 (which will be caught by the M6 as needing to remeasure) local inst = mc.mcGetInstance() local iSlotNumber = 6 -- Figure out which tool is in the slot local regName = string.format("iRegs0/TC/ToolSlots/Slot%d", iSlotNumber) local hReg = mc.mcRegGetHandle(inst, regName) local iToolNum = mc.mcRegGetValue(hReg) --Go set the value of the offset to trigger a remeasure mc.mcToolSetData(inst, mc.MTOOL_MILL_HEIGHT, iToolNum, 999.999) mc.mcCntlSetLastError(inst, string.format("Tool #%d in Slot %d will be remeasured", iToolNum, iSlotNumber)) 0 Rstbtn7 0 353 778 40 55 1 0 1 0 0 CLR 1;18;-24;0;0;0;700;1;0;0;1;0;0;2;32;Arial Narrow 0 0 0 --This script takes the offset value for the tool in slot 1 and makes it 999.999 (which will be caught by the M6 as needing to remeasure) local inst = mc.mcGetInstance() local iSlotNumber = 7 -- Figure out which tool is in the slot local regName = string.format("iRegs0/TC/ToolSlots/Slot%d", iSlotNumber) local hReg = mc.mcRegGetHandle(inst, regName) local iToolNum = mc.mcRegGetValue(hReg) --Go set the value of the offset to trigger a remeasure mc.mcToolSetData(inst, mc.MTOOL_MILL_HEIGHT, iToolNum, 999.999) mc.mcCntlSetLastError(inst, string.format("Tool #%d in Slot %d will be remeasured", iToolNum, iSlotNumber)) 0 Rstbtn8 0 403 778 40 55 1 0 1 0 0 CLR 1;18;-24;0;0;0;700;1;0;0;1;0;0;2;32;Arial Narrow 0 0 0 --This script takes the offset value for the tool in slot 1 and makes it 999.999 (which will be caught by the M6 as needing to remeasure) local inst = mc.mcGetInstance() local iSlotNumber = 8 -- Figure out which tool is in the slot local regName = string.format("iRegs0/TC/ToolSlots/Slot%d", iSlotNumber) local hReg = mc.mcRegGetHandle(inst, regName) local iToolNum = mc.mcRegGetValue(hReg) --Go set the value of the offset to trigger a remeasure mc.mcToolSetData(inst, mc.MTOOL_MILL_HEIGHT, iToolNum, 999.999) mc.mcCntlSetLastError(inst, string.format("Tool #%d in Slot %d will be remeasured", iToolNum, iSlotNumber)) 0 Rstbtn9 0 453 778 40 55 1 0 1 0 0 CLR 1;18;-24;0;0;0;700;1;0;0;1;0;0;2;32;Arial Narrow 0 0 0 --This script takes the offset value for the tool in slot 1 and makes it 999.999 (which will be caught by the M6 as needing to remeasure) local inst = mc.mcGetInstance() local iSlotNumber = 9 -- Figure out which tool is in the slot local regName = string.format("iRegs0/TC/ToolSlots/Slot%d", iSlotNumber) local hReg = mc.mcRegGetHandle(inst, regName) local iToolNum = mc.mcRegGetValue(hReg) --Go set the value of the offset to trigger a remeasure mc.mcToolSetData(inst, mc.MTOOL_MILL_HEIGHT, iToolNum, 999.999) mc.mcCntlSetLastError(inst, string.format("Tool #%d in Slot %d will be remeasured", iToolNum, iSlotNumber)) 0 Rstbtn10 0 503 778 40 55 1 0 1 0 0 CLR 1;18;-24;0;0;0;700;1;0;0;1;0;0;2;32;Arial Narrow 0 0 0 --This script takes the offset value for the tool in slot 1 and makes it 999.999 (which will be caught by the M6 as needing to remeasure) local inst = mc.mcGetInstance() local iSlotNumber = 10 -- Figure out which tool is in the slot local regName = string.format("iRegs0/TC/ToolSlots/Slot%d", iSlotNumber) local hReg = mc.mcRegGetHandle(inst, regName) local iToolNum = mc.mcRegGetValue(hReg) --Go set the value of the offset to trigger a remeasure mc.mcToolSetData(inst, mc.MTOOL_MILL_HEIGHT, iToolNum, 999.999) mc.mcCntlSetLastError(inst, string.format("Tool #%d in Slot %d will be remeasured", iToolNum, iSlotNumber)) 0