(BEGIN PREDATOR NC HEADER)
(MACH_FILE=3AXVMILL_MM.MCH)
(MTOOL T2 S1 D3. H127. DIAM_OFFSET 2 = 1.5)
(SBOX X.5 Y.5 Z-15. L85.5 W85.5 H0.)
(END PREDATOR NC HEADER)

%
O100
(PROGRAM NUMBER)
(PROGRAM NAME - TABLEESCREWHOLES3.TAP)
(POST -  MACH 3 MILL NO ATC METRIC)
(DATE - MON. 09/27/2021)
(TIME - 10:31AM)

N01 G21 G40 G49 G54 G80 G90 G91.1

(Machine Setup - 1  Drill)
(BASESCREWHOLES - 3 - 3.0000)

(N02 T2)
N03 S10000 M03
N04 G00 G90 G54 X43. Y43.
N05 G43 H2 Z10.
N06 Z5.08
N07 G73  X43. Y43. Z-10. R2.54 Q2. F1460.5
N08 X8. Y89.
N09 X43. Y135.
N10 X8. Y181.
N11 X43. Y227.
N12 X8. Y273.
N13 X43. Y319.
N14 X8. Y365.
N15 X43. Y411.
N16 X8. Y457.
N17 X43. Y503.
N18 X8. Y549.
N19 X78.
N20 Y457.
N21 Y365.
N22 Y273.
N23 Y181.
N24 Y89.
N25 Y-3.
N26 X8.
N27 G80
N28 G00 Z10.
N29 M05
N30 M02

(END OF PROGRAM)

N31 M30
%