HiCON Plugin: 2.03.15, Board: 7866, Serial: F2971C, FW: 4.04, FPGA: A1B3, IP: 192.168.0.99, AdapterIP: 192.168.0.10


Do Cycle Start
Probe Sequence Terminated (no digitize)

ProbeEnd: DIGITIZE_TRIGGERED, Probe Sequence Complete

MACRO ALARM: 3 MERROR_TIMED_OUT
THC Setup Sequence Aborted

ERROR: Connection to HiCON has timed out... (5003.972600ms)
ERROR: HiCON disconnected
HiCON Plugin: 2.03.15, Board: 7866, Serial: F2971C, FW: 4.04, FPGA: A1B3, IP: 192.168.0.99, AdapterIP: 192.168.0.10

Clear alarm condition with Reset before Cycle Start.

Do Cycle Start
Probe Sequence Terminated (no digitize)

ProbeEnd: DIGITIZE_TRIGGERED, Probe Sequence Complete

Torch Enable Error. [ArcOK] and [DIGITIZE] signal must be deactivated first.
MACRO ALARM: 3 MERROR_NOT_NOW



Do Cycle Start
Probe Sequence Terminated (no digitize)

ProbeEnd: DIGITIZE_TRIGGERED, Probe Sequence Complete

THC Setup Sequence Aborted

MACRO ALARM: 3 MERROR_NOT_NOW

Do Cycle Start
Clear alarm condition with Reset before Cycle Start.

Do Cycle Start
Probe Sequence Terminated (no digitize)

ProbeEnd: DIGITIZE_TRIGGERED, Probe Sequence Complete

THC Setup Sequence Aborted

MACRO ALARM: 3 MERROR_NOT_NOW
