2016-08-23 10:33:20.015 - Loggging Enabled.
2016-08-23 10:33:24.133 - API: mcAxisDerefAll()
2016-08-23 10:33:24.133 - API: mcAxisDeref() called. axis 0
2016-08-23 10:33:24.133 - Signal id 1129, (X Homed), changed from HIGH to LOW.
2016-08-23 10:33:24.134 - API: mcAxisDeref() called. axis 1
2016-08-23 10:33:24.135 - Signal id 1130, (Y Homed), changed from HIGH to LOW.
2016-08-23 10:33:24.135 - API: mcAxisDeref() called. axis 2
2016-08-23 10:33:24.135 - Signal id 1131, (Z Homed), changed from HIGH to LOW.
2016-08-23 10:33:24.135 - API: mcAxisDeref() called. axis 3
2016-08-23 10:33:24.135 - API: mcAxisDeref() called. axis 4
2016-08-23 10:33:24.135 - API: mcAxisDeref() called. axis 5
2016-08-23 10:33:24.136 - API: mcAxisDeref() called. axis 6
2016-08-23 10:33:24.136 - API: mcAxisDeref() called. axis 7
2016-08-23 10:33:24.136 - API: mcAxisDeref() called. axis 8
2016-08-23 10:33:24.136 - API: mcAxisDeref() called. axis 9
2016-08-23 10:33:24.136 - API: mcAxisDeref() called. axis 10
2016-08-23 10:33:24.136 - API: mcAxisDeref() called. axis 11
2016-08-23 10:33:24.136 - API: mcAxisHomeAll() called.
2016-08-23 10:33:24.136 - Attempt transition from "Idle" on event "Home" Command.cpp:933
2016-08-23 10:33:24.136 - S_IDLE_on_exit
2016-08-23 10:33:24.136 - MACH_STATE_start_homing
2016-08-23 10:33:24.136 - S_HOMING_on_entry
2016-08-23 10:33:24.259 - ESS: Switching from NORMAL to HOMING_PREP state
2016-08-23 10:33:24.460 - ESS: Switching from HOMING_PREP to HOMING state
2016-08-23 10:33:26.211 - Signal id 67, (Motor 2 Home), changed from LOW to HIGH.
2016-08-23 10:33:26.211 - Signal id 1008, (Z Home), changed from LOW to HIGH.
2016-08-23 10:33:26.762 - Signal id 67, (Motor 2 Home), changed from HIGH to LOW.
2016-08-23 10:33:26.762 - Signal id 1008, (Z Home), changed from HIGH to LOW.
2016-08-23 10:33:26.866 - All motors marked as still.
2016-08-23 10:33:26.867 - API: mcAxisHomeComplete() called. axis 2
2016-08-23 10:33:26.867 - Signal id 1131, (Z Homed), changed from LOW to HIGH.
2016-08-23 10:33:26.867 - ESS: Switching from HOMING to HOMING_POST_DELAY state.
2016-08-23 10:33:26.964 - API: mcMotionSync() called.
2016-08-23 10:33:26.964 - SyncPosition()! Clearing planner.
2016-08-23 10:33:26.964 - ESS: Switching from HOMING_POST_DELAY to NORMAL state.
2016-08-23 10:33:27.065 - ESS: Switching from NORMAL to HOMING_PREP state
2016-08-23 10:33:27.242 - ESS: Switching from HOMING_PREP to HOMING state
2016-08-23 10:33:31.194 - Signal id 68, (Motor 3 Home), changed from LOW to HIGH.
2016-08-23 10:33:31.219 - Signal id 66, (Motor 1 Home), changed from LOW to HIGH.
2016-08-23 10:33:31.219 - Signal id 1005, (Y Home), changed from LOW to HIGH.
2016-08-23 10:33:31.919 - Signal id 66, (Motor 1 Home), changed from HIGH to LOW.
2016-08-23 10:33:31.919 - Signal id 1005, (Y Home), changed from HIGH to LOW.
2016-08-23 10:33:31.944 - Signal id 68, (Motor 3 Home), changed from HIGH to LOW.
2016-08-23 10:33:32.048 - All motors marked as still.
2016-08-23 10:33:32.048 - All motors marked as still.
2016-08-23 10:33:32.049 - API: mcAxisHomeComplete() called. axis 1
2016-08-23 10:33:32.049 - Signal id 1130, (Y Homed), changed from LOW to HIGH.
2016-08-23 10:33:32.049 - ESS: Switching from HOMING to HOMING_POST_DELAY state.
2016-08-23 10:33:32.144 - API: mcMotionSync() called.
2016-08-23 10:33:32.144 - SyncPosition()! Clearing planner.
2016-08-23 10:33:32.145 - ESS: Switching from HOMING_POST_DELAY to NORMAL state.
2016-08-23 10:33:32.188 - ESS: Switching from NORMAL to HOMING_PREP state
2016-08-23 10:33:32.198 - ESS: Switching from HOMING_PREP to HOMING state
2016-08-23 10:33:36.410 - Signal id 65, (Motor 0 Home), changed from LOW to HIGH.
2016-08-23 10:33:36.410 - Signal id 1002, (X Home), changed from LOW to HIGH.
2016-08-23 10:33:37.163 - Signal id 65, (Motor 0 Home), changed from HIGH to LOW.
2016-08-23 10:33:37.163 - Signal id 1002, (X Home), changed from HIGH to LOW.
2016-08-23 10:33:37.293 - All motors marked as still.
2016-08-23 10:33:37.293 - API: mcAxisHomeComplete() called. axis 0
2016-08-23 10:33:37.293 - Signal id 1129, (X Homed), changed from LOW to HIGH.
2016-08-23 10:33:37.294 - ESS: Switching from HOMING to HOMING_POST_DELAY state.
2016-08-23 10:33:37.390 - API: mcMotionSync() called.
2016-08-23 10:33:37.390 - SyncPosition()! Clearing planner.
2016-08-23 10:33:37.391 - ESS: Switching from HOMING_POST_DELAY to NORMAL state.
2016-08-23 10:33:37.465 - ESS: Switching from NORMAL to HOMING_PREP state
2016-08-23 10:33:37.668 - ESS: Switching from HOMING_PREP to HOMING state
2016-08-23 10:33:44.006 - API: mcCntlCycleStop() called.
2016-08-23 10:33:44.012 - Attempt transition from "Homing" on event "Stop" MachAPI.cpp:2742
2016-08-23 10:33:44.012 - S_HOMING_on_exit
2016-08-23 10:33:44.012 - MACH_STATE_stop
2016-08-23 10:33:44.044 - S_IDLE_on_entry
2016-08-23 10:33:44.117 - API: mcAxisHomeComplete() called. axis 5
2016-08-23 10:33:44.117 - Attempt transition from "Idle" on event "Stop Home" Command.cpp:1040
2016-08-23 10:33:44.117 - Can't transition from "Idle" on event "Stop Home"
2016-08-23 10:33:44.117 - ESS: Error condition. Switching from HOMING to NORMAL state.
2016-08-23 10:33:44.117 - API: mcMotionSync() called.
2016-08-23 10:33:44.117 - SyncPosition()! Clearing planner.
2016-08-23 10:33:44.546 - API: mcSpindleSetDirection(inst = 0, dir = 0) called.
2016-08-23 10:33:44.547 - ESS Called with Spindle Message at time 55332.552552.  SetSpindlePWM(0). gState.SpindleCfg.dPWMBaseFreq = 1000.000000