Startup of Menu handler
Menu at MenuItem: : 6000
 Ex Time set to :  : 0.0010
 Sending Cfg. 
 Done... 
Axis X, Dir: : Port: 1, Pin: 17, Value: 2, Negated: 1
Axis Z, Dir: : Port: 1, Pin: 16, Value: 6, Negated: 1
Unused: : Port: 1, Pin: 14, Value: 0, Negated: 0
Charge Pump: : Port: 1, Pin: 9, Value: 0, Negated: 1
Axis Y, Dir: : Port: 1, Pin: 8, Value: 4, Negated: 1
Axis X, Step: : Port: 1, Pin: 7, Value: 3, Negated: 1
Axis Y, Step: : Port: 1, Pin: 6, Value: 5, Negated: 1
Axis Z, Step: : Port: 1, Pin: 5, Value: 7, Negated: 1
Unused: : Port: 1, Pin: 4, Value: 0, Negated: 0
GPIO: : Port: 1, Pin: 3, Value: 0, Negated: 1
Axis S, Step: : Port: 1, Pin: 2, Value: 15, Negated: 1
Axis S, Dir: : Port: 1, Pin: 1, Value: 14, Negated: 1
Unused: : Port: 2, Pin: 17, Value: 0, Negated: 0
Unused: : Port: 2, Pin: 16, Value: 0, Negated: 0
Unused: : Port: 2, Pin: 14, Value: 0, Negated: 0
Unused: : Port: 2, Pin: 9, Value: 0, Negated: 0
Unused: : Port: 2, Pin: 8, Value: 0, Negated: 0
Unused: : Port: 2, Pin: 7, Value: 0, Negated: 0
Unused: : Port: 2, Pin: 6, Value: 0, Negated: 0
Unused: : Port: 2, Pin: 5, Value: 0, Negated: 0
Unused: : Port: 2, Pin: 4, Value: 0, Negated: 0
Unused: : Port: 2, Pin: 3, Value: 0, Negated: 0
Unused: : Port: 2, Pin: 2, Value: 0, Negated: 0
Unused: : Port: 2, Pin: 1, Value: 0, Negated: 0
Unused: : Port: 3, Pin: 17, Value: 0, Negated: 0
Unused: : Port: 3, Pin: 16, Value: 0, Negated: 0
Unused: : Port: 3, Pin: 14, Value: 0, Negated: 0
Unused: : Port: 3, Pin: 9, Value: 0, Negated: 0
Unused: : Port: 3, Pin: 8, Value: 0, Negated: 0
Unused: : Port: 3, Pin: 7, Value: 0, Negated: 0
Unused: : Port: 3, Pin: 6, Value: 0, Negated: 0
Unused: : Port: 3, Pin: 5, Value: 0, Negated: 0
Unused: : Port: 3, Pin: 4, Value: 0, Negated: 0
Unused: : Port: 3, Pin: 3, Value: 0, Negated: 0
Unused: : Port: 3, Pin: 2, Value: 0, Negated: 0
Unused: : Port: 3, Pin: 1, Value: 0, Negated: 0
Debounce Enable command : 0
EStop Enable command : 2
Append_SpindleIndexPrescaleValue command : 0
Append_ControlBits_Cmd command : 130
 Jog Acc set in init: : 1530857
 Jog Acc set in init: : 1530857
 Jog Acc set in init: : 1065040
 Jog Acc set in init: : 32750
 Jog Acc set in init: : 32750
 Jog Acc set in init: : 32750
Append_ControlBits_Cmd command : 128
 Ethernet SmoothStepper board fully initialised. Run of device begins.