Install instructions for Darwin Printer Port driver testing. This is a dual axis test release.


1)    Open the DarwinDriver folder, run the DarwinTest.exe , this will load the driver. If it fails to load you
      need to load the drivcer manually from this folder as in Mach3 with the old driver.
   
2)    Copy mcDarwin.m4pw to the plugins folder and copy DarwinDLL.dll to the Mach4 program folder.

3)    Remove sim.m4pw , it appears to interfere with Darwin, we're not sure why yet.

4)    Watch config video.. https://www.youtube.com/watch?v=N7BmlLNxBSs and config both Darwin and Mach4


 NOTE:  In this version Darwin has been limited to 2 motors. Do not configure MAch4 or Darwin for other
 than the first two motors or it will fail with "Speed too fast " errors.
 
 Please report your experiences good or bad in the forum.
 
 Thx
 Art
 

 