(BEGIN PREDATOR NC HEADER)
(MCH_FILE=LATHE.MCH)
(END PREDATOR NC HEADER)
 
%
O00001 (PROGRAM NUMBER)
(PROGRAM START - TURNING CYCLES)
(PROGRAM NAME - BOBCAD2NC)
(POST - MACH 3)
(DATE - FRI. 04/08/2011)
(TIME - 02:19PM)
( )
( )
N01 G18 G20 G40 G80 G90 G98
( )
(JOB 1  ROUGH CYCLE )
(TOOL #1 80 DEG. 1/64 ROUGH TURNING )
N02 T0101 M06
N03 G50
N04 G00 G54 X1.1 Z.093 M08
( )
N05 X.95
N06 G01 Z-.192 F5.
N07 X.952 Z-.197
N08 X.953 Z-.201
N09 X.96 Z-.234
N10 X.96 Z-.24
N11 X.962 Z-.267
N12 X.962 Z-1.117
N13 X.972
N14 G00 Z.093
N15 X.9
N16 G01 Z-.097
N17 X.904 Z-.101
N18 X.921 Z-.126
N19 G03 X.926 Z-.134 R.065
N20 G01 X.94 Z-.162
N21 G03 X.943 Z-.17 R.049
N22 G01 X.95 Z-.192
N23 X.96
N24 G00 Z.093
N25 X.85
N26 G01 Z-.049
N27 X.853 Z-.051
N28 X.855 Z-.052
N29 X.88 Z-.075
N30 X.884 Z-.078
N31 X.9 Z-.097
N32 X.91
N33 G00 Z.093
N34 X.8
N35 G01 Z-.02
N36 X.822 Z-.031
N37 G03 X.829 Z-.035 R.044
N38 G01 X.85 Z-.049
N39 X.86
N40 G00 Z.093
N41 X.766
N42 G01 Z-.007
N43 X.789 Z-.015
N44 G03 X.8 Z-.02 R.108
N45 G01 X.81
N46 G00 X5.
N47 Z5.
N48 M09
N49 M05
( )
(END OF PROGRAM)
N50 M02
%