'Laser Zero M800
'
' Move to the X,Y of Laser
'
'Used to center the rounter bit
'over the place you want to 
'start cutting
'
'Change the offset in the 
'second line for X and Y.
'
Code "(Laser Zero Macro)"
Code "G91 G0 X-1.628 Y-2.736"     'X= -1.79 Y = -2.625
While IsMoving()
Wend
Code "G90 M9"
DoOEMButton (1008)
DoOEMButton (1009) 

Code "(Laser Zero Macro Completed)"