(BEGIN PREDATOR NC HEADER)
(MACH_FILE=3AXVMILL.MCH)
(MTOOL T1 S1 D.125 H5. DIAM_OFFSET 1 = .0625)
(MTOOL T2 S1 D.25 H2.5 DIAM_OFFSET 2 = .125)
(SBOX X0. Y0. Z-.125 L6. W2.5 H.125)
(END PREDATOR NC HEADER)

%
O100
(PROGRAM NUMBER)
(PROGRAM NAME - SHERLINE WAY COVER FRONT PLATE (SLIDING).NC)
(POST -  MACH 3 MILL NO ATC)
(DATE - SUN. 11/01/2009)
(TIME - 10:01AM)

N01 G20 G40 G49 G54 G80 G90 G91.1
N02 G53 Z0.

(JOB 1  HOLE  RANDOM POINT PATTERN)
(DRILL .250 HOLE)

N03 T1
N04 S2994 M03
N05 G00 G90 G54 X3.1875 Y1.375
N06 G43 H1 Z.1 M08
N07 G81 G98 X3.1875 Y1.375 Z-.08 R.1 F11.9786
N08 G80
N09 Z.1
N10 M09
N11 M05
N12 G53 Z0.
N13 G53 X0. Y0.
N14 M01

(JOB 1  HOLE  RANDOM POINT PATTERN)
(DRILL .250 HOLE)

N15 T2
N16 S2505 M03
N17 G00 G90 G54 X3.1875 Y1.375
N18 G43 H2 Z.1 M08
N19 G81 G98 X3.1875 Y1.375 Z-.3001 R.1 F20.0459
N20 G80
N21 G00 Z.1

(JOB 2  CONTOUR)
(EDGE PROFILING .250 4FEM)

N22 S2505
N23 G00 X.4482 Y2.125
N24 M98 P11 (SUBPROGRAM CALL)
N25 G00 Z.1
N26 M09
N27 M05
N28 G53 Z0.
N29 G53 Y0.
N30 M02

O11 (SUBPROGRAM OF O100)
G01 Z-.5 F20.0459
X-.125 Y1.5518 F39.0895
Y-.3327
X.5625 Y.453
Y.6563
X.875
Y.9375
X2.
Y1.375
X2.625
Y.9375
X3.8438
Y.6563
X4.4374
Y.4531
X5.125 Y-.3327
Y1.5518
X4.5518 Y2.125
X.4482
M99 (SUBPROGRAM RETURN)


(END OF PROGRAM)

N31 M30
%