*******************************ProgramStart**********************************

 (File: {FILE_NAME}) ' File Name

(Date: {DATE}) 'Time & Date

(Post: Chips Laser Example Post.pst)

G90   (Set ABS Mode)
G91.1 (Set IJ Inc Mode)

********************************ToolChange***********************************



********************************ChainStart***********************************


***********************************Rapid*************************************

S0 ;Spindle speed-S0-Rapid----------------------------------------

G{MODE} Z{RAPIDHEIGHT}
G{MODE} X{XPOS} Y{YPOS}
'---------------------------G{MODE} Z{ZPOS}
Z{STARTHEIGHT}
'---------------------------M3(PLasma On)
{SPEED} ;----------spindlespeed--Rapid----
'-------------------------------------------S5000 ;Spindle speed-S5000 Rapid---------------------------------




{PIERCEDELAY}


***********************************ZRapid************************************



************************************Line**************************************



[G{MODE}][ X{XPOS}][ Y{YPOS}][ Z{ZPOS}] [F{FEED}]


************************************Arc***************************************





[G{MODE}][ X{XPOS}][ Y{YPOS}][ Z{ZPOS}] I{IPOS} J{JPOS} [F{FEED}]

********************************CanCycleStart*********************************

G1 Z{ZPOS} F{FEED}
'---------------------------------{LIFTDELAY}
'----------------------------------------M5(Plasma Off)
G0 Z{RAPIDHEIGHT}


**********************************InCanCycle**********************************

G0 X{XPOS} Y{YPOS}
Z{STARTHEIGHT}
'-------------------------------------M3(PLasma On)

'----------------------------------------------S5000 ;Spindle speed-In Caned Cycle---------------------------

{SPEED} ;----------spindlespeed---InCanCycle---



{PIERCEDELAY}
G1 Z{ZPOS}F{FEED}
{LIFTDELAY}
'------------------------------------M5(Plasma Off)

S0 ;Spindle speed-In Caned Cycle------------------------------

G0 Z{RAPIDHEIGHT}


**********************************CanCycleEnd*********************************


************************************ChainEnd**********************************

{LIFTDELAY}
'----------------------------M5 (Plasma Off)

'------------------------S0 ;Spindle speed-Chain End-----------------------------


**********************************ProgramEnd**********************************

G{MODE} Z{RAPIDHEIGHT}

'---------------------------M5(Plasma Off)

S0 ;Spindle speed-Program End------------------------------

M5 ; M5 added Program End

G{MODE} Z{RAPIDHEIGHT} 

G00 x0 y0 (HOME X, Y)

M30 (END RETURNE)

%