5081
General Mach Discussion / Re: My retrofit nightmare
« on: May 15, 2013, 02:51:31 AM »
It looks like the E-Stop on that board comes out to a relay, that is a good thing as it means you can do several things with it such as conecting as mentioned previously.
For example it would seem your relay has both normally open and normally closed contacts, so the normally open can feed to the stepper drives enable inputs and the normally closed can feed to the ESS input as an E-Stop input. You can also put your other E-Stop switch in the chain just by connecting it in series with that relay.
Hood
For example it would seem your relay has both normally open and normally closed contacts, so the normally open can feed to the stepper drives enable inputs and the normally closed can feed to the ESS input as an E-Stop input. You can also put your other E-Stop switch in the chain just by connecting it in series with that relay.
Hood