Hello
Guest
it is
May 09, 2024, 08:10:46 PM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
G-Code, CAD, and CAM
/
LazyCam (Beta)
/
Pulling my hair out
« previous
next »
Print
Pages:
1
2
»
Go Down
Author
Topic: Pulling my hair out (Read 5690 times)
0 Members and 1 Guest are viewing this topic.
brentwford
8
Pulling my hair out
«
on:
April 21, 2007, 08:43:59 AM »
Hi guys; Here are 2 screen shots. One of the autocad file I want to cut and a second of the LazyCam import. Anyone know why this is happening? I've been messing around with this on and off for a week now and haven't made any progress.
Thanks and have a good one.
Logged
Graham Waterworth
2,679
Yorkshire Dales, England
Re: Pulling my hair out
«
Reply #1 on:
April 21, 2007, 10:16:31 AM »
Save the dxf out of acad in R12 or 2000 format and try again.
Graham.
Logged
Without engineers the world stops
brentwford
8
Re: Pulling my hair out
«
Reply #2 on:
April 21, 2007, 10:22:43 AM »
Hi; I tried exporting in both r12 and 2000 dxf format. Still loads into Lazycam the same.
thanks for the suggestion though.
Logged
Graham Waterworth
2,679
Yorkshire Dales, England
Re: Pulling my hair out
«
Reply #3 on:
April 21, 2007, 01:58:29 PM »
Post your .dxf file and we will have a look.
Graham.
Logged
Without engineers the world stops
brentwford
8
Re: Pulling my hair out
«
Reply #4 on:
April 21, 2007, 02:10:46 PM »
Hi and Thanks; The dxf is attached.
Logged
Graham Waterworth
2,679
Yorkshire Dales, England
Re: Pulling my hair out
«
Reply #5 on:
April 21, 2007, 03:51:48 PM »
It loads fine into my CAD system, no problems found in the file, but I can't get LCAM to load it correctly ether, I think this is one for Brian.
I have sent it to him for his comments.
Graham.
Logged
Without engineers the world stops
Graham Waterworth
2,679
Yorkshire Dales, England
Re: Pulling my hair out
«
Reply #6 on:
April 21, 2007, 04:15:14 PM »
Just upgraded to 2.0.065 and it load fine.
Graham.
Logged
Without engineers the world stops
brentwford
8
Re: Pulling my hair out
«
Reply #7 on:
April 21, 2007, 06:59:12 PM »
Hmmm, I just installed 2.0.065 of Mach3 and the LazyCam version is listed as 2.0.060. Does not work here, same problem. I wouldn't mind trying the Beta of LazyCam but can't seem to get logged in to the FTP site. Thanks so much for the help.
Logged
Chip
2,055
Gainesville Florida USA
Re: Pulling my hair out
«
Reply #8 on:
April 21, 2007, 08:33:11 PM »
Hi, Brent
I had the same problem with your file.
Loaded it in Turbo-Cad Exploded it and it loads fine in LC now.
Try this one below.
Hope this Helps, Chip
Logged
brentwford
8
Re: Pulling my hair out
«
Reply #9 on:
April 21, 2007, 11:00:26 PM »
Wow! that did it! Guess I need to get a copy of TurboCad! Thanks again for all the help guys.
Logged
Print
Pages:
1
2
»
Go Up
« previous
next »