221
General Mach Discussion / Re: Mach3 VB Script Help
« on: February 10, 2016, 12:54:34 PM »
HI Ian, Very good advice. I agree take simple steps coding and testing as you go. The first thing I do is get teh motion correct then work on the math.
And just a note (;-) Ian has helped me a great deal working with Mach3 (;-) His programming advise is HIGHLY valued here.
Another tip , you are working in 2 motion modes G91 (Inc) and G90 (Abs) don't get them mixed up when you go to move (;-) each has it's own advantages/Disadvantages. AND you can do this several different ways (;-) so there is really no right way or wrong way IF the end results are correct.
And just a note (;-) Ian has helped me a great deal working with Mach3 (;-) His programming advise is HIGHLY valued here.
Another tip , you are working in 2 motion modes G91 (Inc) and G90 (Abs) don't get them mixed up when you go to move (;-) each has it's own advantages/Disadvantages. AND you can do this several different ways (;-) so there is really no right way or wrong way IF the end results are correct.