Nice, thanks!
Does this work as well?
function M100()
local inst = mc.mcGetInstance()
local input_20 = mc.mcSignalGetHandle(inst, mc.ISIG_INPUT20) -- Get handle for input 20
local input_20_State = mc.mcSignalGetState(input_20) -- Get input 20 state
if input_20 == 0 then
wx.wxMessageBox("Could not locate signal!")
else
if input_20_State == 1 then --If input_20_State equals 1, then the signal is active.
wx.wxMessageBox("Signal is already active!")
else --If input_20_State does not equal 1, then the signal is inactive.
--wx.wxMessageBox("Setting input_20 high")
mc.mcSignalSetState(input_20, 1)
mc.mcSignalWait(inst, mc.ISIG_INPUT21, 1, 0)
end
end
end
if (mc.mcInEditor() == 1) then
M100()
end
Also, just wondering what this is......... mc.mcSignalSetState(input_20, 1)
Shouldn't that be turning on an output to fire the raise solenoid?