11961
General Mach Discussion / Re: Mach 3 Driver test. Results for 3 computers, which is best? (PICS)
« on: March 30, 2011, 09:31:08 AM »
Actually you would also have to take into account the value travelled by one rev of the output so your step value on X and Y would be different than what I said in the last mail.
What you need is the step per inch, that will give you your min resolution. So really you need encoder counts, any gearing, any electronic gearing and finally pitch to work out what the min step will be.
Hood
What you need is the step per inch, that will give you your min resolution. So really you need encoder counts, any gearing, any electronic gearing and finally pitch to work out what the min step will be.
Hood