1141
CS-Lab / Re: CSMIO-ENC Spindle Orientation
« on: January 22, 2016, 05:13:01 PM »
Ok but you could still try the invert option to see, only a click in a box.
I only use the encoder outputs from my servo drive, I only have the motors encoder. What I do is have the outputs from drive go to IP-A then have them jumpered across to the Enc module, seems to work fine for everything except the Spindle Align. I am wondering if it has something to do with the drives outputs as my actual encoder is sine/cosine so doesnt have an index pulse as such.
Hood
I only use the encoder outputs from my servo drive, I only have the motors encoder. What I do is have the outputs from drive go to IP-A then have them jumpered across to the Enc module, seems to work fine for everything except the Spindle Align. I am wondering if it has something to do with the drives outputs as my actual encoder is sine/cosine so doesnt have an index pulse as such.
Hood