6086
« on: January 31, 2013, 07:49:57 AM »
There is a list in a sticky at the top of the forum, "OEM codes for buttons, DRO's and LED's" there you will find a xls file with the OEM codes for buttons, LEDs etc There is also the same list on the wiki, I just put it in the Excel document so you can search easily and donthave to go online to the wiki.
Yes what you are thinking is correct and yes for that code you would have to set up in ports and pins to Output 1, 2 and 3 but you could change to other outputs if you are already using these ones.
The macropump is a file in the macro folder of the profile you use, eg if you use a standard Mill profile it will be in the folder c:\Mach3\Macros\Mach3Mill To open you can go to Operator menu in Mach then Edit VB Script and a window will open, browse to your folder and open Macropump.m1s then paste in the above (or modified for your outputs) then save and close. Next go to Config menu in Mach then General Config and on the right you will see Use Macropump, choose that and restart Mach and it should work.
Hood