1841
Post Processors / Re: Vectric post processor for Mach 4 laser operation.
« on: September 18, 2018, 01:13:44 AM »Hi,
Has mach4 got to the point where you can control a laser without the delay turning the last on and off? I've never got Mach3 to work without the long delays...
Yes.
For Mach3 the commands are M11Px / M10Px and for Mach4 they are M62Px / M63Px (x being the Output# being switched). These commands switch the laser at the instant of axis movement so there is no delay.
Tweakie.